Features:

• 1.0 GHz  Intel Celeron M with thermal throttling
• ISA & PCI Expansion Busses
• 512 Mbytes  SDRAM
• PC Speaker
• 32 pin SSD socket supports:
  • Miniature 4GB ATA/IDE Flash Disk installed unless otherwise specified
  • Natively supported by all major operating systems
• 4 RS-232/422/485 Ports
• Real Time Clock Battery backup
• Modular rugged milled aluminum frames 
• Integral Structural Heatsink with Embedded Heatpipes & External Fins for superior heat dissipation
• Complete PC-compatible motherboard
• Maintains the PCI-104 bus self-stacking concept 
• Allows quick interchangeability of modules 
• Each frame includes CMA157886CX1000HR cpuModule, CMT36106HR Peripheral Module, wiring and connectors 
• Aluminum Alloy - 6061, Temper-T6, clear chromate 

• 9 pin male D-Sub connector with RJ-45 Adapter

  • 10/100 BASE-T Ethernet
    • Ethernet Controller
      • Intel 82559ER Fast Ethernet PCI Controller
      • Integrated 3KByte Transmit and 3Kbyte Receive FIFOs
    • Physical Layer
      • 100Base-Tx and 10Base-T
    • Easy to Use
      • Low Power Features
      • Status LEDs
      • Software configuration
• Two 9 pin male D-Sub connectors
  • Four BIOS configurable RS-232/422/485 serial ports on two connectors, each connect configurable as:
    • One full RS-232 port with TxD, RxD, CTS, RTS, DSR, DTR, RI, and CD
    • One RS-422/485 port with TxD+, TxD-, RxD+, RxD-, with 120 ohm termination jumper
    • Two RS-232 ports:
      • One with TxD, RxD, CTS, and RTS
      • One with TxD and RxD
    • One RS-232 port with TxD and RxD, and one RS-422/485 port with TxD+, TxD-, RxD+, RxD-, with 120 ohm termination jumper
    • Jumper enabled two RS-422/485 ports each with TxD+, TxD-, RxD+, RxD-, with 120 ohm termination jumper
    • 16550 compatible UARTs for high-speed
• Two 9 pin male D-Sub connectors
  • Four USB 2.0 Ports
    • Supports 480 Mb/s (high-speed), 12Mb/s (full-speed), and 1.5Mbs (low speed) peripherals
    • 500 mA @ 5 Vdc provided per port
    • USB Boot capability
• 15 pin female high density D-Sub Monitor connector &
  20 pin female micro D-Sub LVDS Panel connector
  • SVGA and LVDS Panel
    • Resolution up to 1920 x 1440 pixels with 32K colors
    • VGA, SVGA, XGA, SXGA, UXGA
    • Up to 16 million colors
    • High-performance memory
      • 2MB to 64MB of shared SDRAM memory
• 25 pin female D-Sub connector
  • 14 Advanced Digital I/O (aDIO)
    • One 8-bit-programmable I/O with Advanced Digital Interrupt Modes
      • Event Mode Interrupt generates an interrupt when any input bit changes
      • Match Mode Interrupt generates an interrupt when input bits match a preset value
      • External Strobe Mode latches 8 data inputs and generates and interrupt
    • One 4-bit port programmable as input or output
    • Two Strobes can be configured as readable inputs.
• 6 pin female mini-DIN connector
  • PS/2 Mouse port
• 6 pin female mini-DIN connector
  • keyboard port
• Hardware Reset Button

• EIDE Controller
• 32 pin SSD socket supports:
  • Miniature 4GB ATA/IDE Flash Disk installed unless otherwise specified
  • Natively supported by all major operating systems

• IDAN Pinout and Dimensional Drawings (see Appendix C)
• CMA157886CX Hardware Manual
• CMT56106 Hardware Manual
• Drivers and Example Programs
• Software Manual(s)
• Application Notes

Copyright © 1998-2008 RTD Embedded Technologies, Inc.  All rights reserved.