RTD Embedded Technologies, Inc. PC104 and PC104 plus embedded computers Home Page RTD Product Menu Single Board Computers Digital Signal Processing Frame Grabber SVGA Panel DVI MPEG Bluetooth WLAN 802.11 Cellular GSM GPRS GPS-Rail Ethernet Quad Serial CAN Bus USB 2.0 Modem PCMCIA GPS Hard Drives Power Supplies IDE & Floppy Up to 16 Bit Resolution 8 differential or 16 single ended inputs 16-bit 200 kHz throughput outputs FIFO buffer Channel Gain Table Pacer & Burst Clocks Programmable Gain Bit Programmable Opto-isolated Timer/Counters Incremental Encoders Servo Motor Control Synchro / Resolver DC/DC Isolated Avionics IDAN HiDAN HiDANplus Return to RTD's Home Page

IDAN™ dataModule® Selection Guide


    IDAN PC/104-Plus & PCI-104 Smart Analog I/O
   & Digital I/O dataModules® with Autonomous SmartCal™

Smart Analog I/O & Digital I/O with
Autonomous SmartCal™
High Reliability (HR):  -40º to +85º C
PC/104-Plus Description OEM

 IDAN-SDM7540HR-1S

 SDM7540HR-1 HighRel 12-bit, 1.25 MHz 16 analog input channels, 1K FIFO.  Two12-Bit, 200 kHz analog output channels & 16 digital I/O lines.
SINGLE HEIGHT: machined aluminum frame.
FRONT PANEL: 26 pin high density "D" for AIO
                              44 pin high density "D" for DIO
BACK PANEL: Two serial ports 9 pin "D"
                            McBSP & SyncBus

$ 1445

 IDAN-SDM7540HR-8S

 IDAN-SDM7540HR-1S with 8K FIFO

$1595
PCI-104 Description OEM

IDAN-SDM8540HR-1S

 SDM8540HR-1 HighRel 12-bit, 1.25 MHz 16 analog input channels, 1K FIFO.  Two12-Bit, 200 kHz analog output channels & 16 digital I/O lines.
SINGLE HEIGHT: machined aluminum frame.
FRONT PANEL: 26 pin high density "D" for AIO
                              44 pin high density "D" for DIO
BACK PANEL: Two serial ports 9 pin "D"
                            McBSP & SyncBus

$ 1445

 IDAN-SDM8540HR-8S

 IDAN-SDM8540HR-1S with 8K FIFO

$ 1595
 


    IDAN PC/104 & PC/104-Plus Analog I/O & Digital I/O dataModules®

Analog I/O & Digital I/O
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM

 IDAN-DM6425HR-1-62D/68D

 DM6425HR-1 HighRel 12-bit, 500 kHz 32 analog input channels, 1K FIFO.  Four12-Bit, 200 kHz analog output channels & 32 digital I/O lines. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62D: (2)  IDAN-XKCM17
Recommended Cable for -68D: (2)  IDAN-XTMS-68 

$ 1045

 IDAN-DM6425HR-8-62D/68D

 IDAN-DM6420HR-1-62S/68S with 8K FIFO

$ 1195

 IDAN-DM6420HR-1-62S/68S

 DM6420HR-1 HighRel 12-bit, 500 kHz 16 analog input channels, 1K FIFO.  Two12-Bit, 200 kHz analog output channels & 16 digital I/O lines. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62S:  IDAN-XKCM17
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 895

 IDAN-DM6420HR-8-62S/68S

 IDAN-DM6420HR-1-62S/68S with 8K FIFO

$ 1045

 IDAN-DM6430HR-1-62S/68S

 DM6430HR-1 HighRel 16-bit, 100 kHz 16 analog input channels, 1K FIFO.  Two16-Bit, 100 kHz analog output channels and 16 digital I/O lines. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62S:  IDAN-XKCM17
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 895

 IDAN-DM6430HR-8-62S/68S

 IDAN-DM6430HR-1-62S/68S with 8K FIFO

$ 1045
PC/104-Plus Description OEM

 IDAN-DM7520HR-1-68S

 DM7520HR-1 HighRel 12-bit, 1.25 MHz 16 analog input channels, 1K FIFO.  Two12-Bit, 200 kHz analog output channels & 16 digital I/O lines. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 68 pin subminiature "D". 
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 1095

 IDAN-DM7520HR-8-68S

 IDAN-DM7520HR-1-68S with 8K FIFO

$1245
 


    IDAN PC/104 Analog Output & Digital I/O dataModules®

Analog Output & Digital I/O
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM

 IDAN-DM6604HR-62S/68S

 DM6604HR Eight 12-Bit, 100 kHz analog output channels & 24 digital I/O lines. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62S:  IDAN-XKCM17
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 695
IDAN-DM6620HR-1-62S/68S DM6620HR-1 HighRel 12-Bit, 200 kHz, 16 analog output channels with 1K FIFO & 16 digital I/O lines. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62S:  IDAN-XKCM17
 Recommended Cable for -68S:  IDAN-XTMS-68  

$ 895
IDAN-DM6620HR-8-62S/68S IDAN-DM6620HR-1-62S/68S with 8K FIFO

$ 995
 


    IDAN PC/104 Analog Input & Digital I/O dataModules®

Analog Input & Digital I/O
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM

 IDAN-DM6210HR-62S/68S

 DM6210HR 12-bit, 40 kHz, 16 analog input channels & 16 digital I/O lines. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62S:  IDAN-XKCM17
 Recommended Cable for -68S:  IDAN-XTMS-68 

$ 595
 


    IDAN PC/104 & PC/104-Plus Digital I/O dataModules®

Digital I/O & Counter/Timer
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM

 IDAN-DM6806HR-62S/68S

 DM6806HR 24 digital I/O lines, three 16-bit counter/timers. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62S:  IDAN-XKCM17
 Recommended Cable for -68S:  IDAN-XTMS-68 

$ 355

 IDAN-DM6810HR-62D/68D

 DM6810HR 48 bit-programmable diode protected digital I/O lines, three 16-bit counter/timers. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62/68 pin high density "D". 
Recommended Cables for -62D:  (2)  IDAN-XKCM17 
Recommended Cables for -68D:  (2)  IDAN-XTMS-68

$ 495

 IDAN-DM6910HR-68S

 DM6910HR 48 bit-programmable digital I/O lines, three 16-bit counter/timers. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 68 pin subminiature "D".
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 495

 IDAN-DM6812HR-62D/68D

 DM6812HR 24 bit-programmable, 24 port programmable  diode protected digital I/O lines, advanced digital interrupt modes & three 16-bit counter/timers. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62/68 pin high density "D". 
Recommended Cables for -62D:  (2)  IDAN-XKCM17 
Recommended Cables for -68D:  (2)  IDAN-XTMS-68 

$ 495

 IDAN-DM6912HR-68S

 DM6912HR 24 bit-programmable, 24 port programmable digital I/O lines, advanced digital interrupt modes & three 16-bit counter/timers. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 68 pin subminiature "D".
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 495
PC/104-Plus Description OEM

 IDAN-DM7820HR-68S

 DM7820HR 48 diode protected digital I/O lines with 2MB input FIFO buffer.
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: One 68 pin subminiature "D". 
REAR PANEL: One 68 pin subminiature "D". 
Recommended Cable for -68S:  (2)  IDAN-XTMS-68 

$ 745
 


Specialty I/O Modules


    IDAN PC/104 Pulse Width Modulator & Digital I/O dataModules®

Pulse Width Modulator & Digital I/O
High Reliability (HR):  -40º to +85º C

PC/104 Description OEM

 IDAN-DM6816HR-62S/68S

 DM6816HR Nine 8-bit pulse width modulator outputs, 9 digital outputs and three 16-bit counter/timers. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 62/68 pin high density "D"
Recommended Cable for -62S:  IDAN-XKCM17 
Recommended Cable for -68S:  IDAN-XTMS-68

$ 495

 IDAN-DM6916HR-68S

 DM6916HR Nine 8-bit pulse width modulator outputs, 9 digital outputs and three 16-bit counter/timers. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 68 pin subminiature "D". 
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 495
 


    IDAN PC/104 Incremental Encoder & Digital I/O dataModules®

Incremental Encoder & Digital I/O
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM

 IDAN-DM6814HR-62D/68D

 DM6814HR Three 16-bit incremental encoder channels, 6 digital I/O lines, 12 digital input lines & three 16-bit counter/timers. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62/68 pin high density "D". 
Recommended Cables for -62D:  (2)  IDAN-XKCM17  
Recommended Cables for -68D:  (2)  IDAN-XTMS-68

$ 495

 IDAN-DM6914HR-68S

 DM6914HR Three 16-bit incremental encoder channels, 6 digital I/O lines, 12 digital input lines & three 16-bit counter/timers. 
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 68 pin subminiature "D".
Recommended Cable for -68S:  IDAN-XTMS-68 

$ 495
 

    
    IDAN PC/104 Opto-Isolated, Relay & Digital I/O dataModules®

Opto-Isolated Input
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM

IDAN-DM6852HRD

 DM6852HR-H 4 Opto-isolated inputs, 8 isolated outputs & 24 non-isolated digital I/O lines. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 37 pin "D" & 62 pin high density "D".
Recommended Cable for 62D:  IDAN-XKCM17

$ 675

 IDAN-DM6854HRD

 DM6854HR-H 8 Opto-isolated inputs, 4 isolated outputs & 24 non-isolated digital I/O lines. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: 37 pin "D" & 62 pin high density "D".
Recommended Cable for 62D:  IDAN-XKCM17

$ 639

 IDAN-DM6856HR-62D/68D

 DM6856HR 16 Opto-isolated inputs  +5V to +24V, & 16 Opto-isolated outputs. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62D:  (2)  IDAN-XKCM17
 Recommended Cable for -68D:  (2)  IDAN-XTMS-68 

$ 545

 IDAN-DM6858HR-62D/68D

 DM6858HR 32 Opto-isolated inputs +5V to +24V. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62D:  (2)  IDAN-XKCM17
Recommended Cable for -68D:  (2)  IDAN-XTMS-68 

$ 545

 IDAN-DM6888HR-62D/68D

 DM6888HR 48 Opto-isolated inputs,  +5V to +24V, 16 Opto-isolated outputs. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
REAR PANEL: One 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62D:  (3)  IDAN-XKCM17
Recommended Cable for -68D:  (3)  IDAN-XTMS-68 

$ 895
 

Relay Output
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM

 IDAN-DM6952HR-62D/68D

 DM6952HR-H 16 channel relay output. 
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62D:  (2)  IDAN-XKCM17
Recommended Cable for -68D:  (2)  IDAN-XTMS-68 

$ 475

 IDAN-DM6956HR-62D/68D

 DM6956HR-H 16 channel relay output. 
16 Opto-isolated inputs,  +5V to +24V, 1000 Vrms isolation.
DOUBLE HEIGHT: machined aluminum frame.  
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
  Recommended Cable for -62D:  (2)  IDAN-XKCM17
  Recommended Cable for -68D:  (2)  IDAN-XTMS-68
REAR PANEL: One 37 pin "D". 
  Recommended Cable:  (1)  IDAN-XKCM37

$ 677


IDAN PC/104 & PC/104-plus Field Programmable Digital I/O dataModules®

User Application Specific FPGA Digital I/O
High Reliability (HR):  -40º to +85º C
PC/104 Description OEM
IDAN-FPGA6800HR-62D FPGA6800HR designed by user
99 ESD protected digital I/O lines with 128K x 16 SRAM onboard.
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62D:  (2)  IDAN-XKCM17
 Recommended Cable for -68D:  (2)  IDAN-XTMS-68 

$645
SK-IDAN-FPGA6800HR-62D Includes FPGA6800HR, Xilinx WebPack software DVD,
USB programming cable and ISA bus design book

$970
Custom
IDAN-FPGA6800HR-62D		 FPGA6800HR Custom designed by RTD
99 ESD protected digital I/O lines with 128K x 16 SRAM onboard.
DOUBLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -62D:  (2)  IDAN-XKCM17
Recommended Cable for -68D:  (2)  IDAN-XTMS-68 

RFQ
PC/104-plus Description OEM
Custom
IDAN-FPGA7800HR-68S		 FPGA Custom designed by RTD
48 diode protected digital I/O lines with 8MB SDRAM onboard.
SINGLE HEIGHT: machined aluminum frame. 
FRONT PANEL: Two 62 pin high density "D" or 68 pin subminiature "D". 
Recommended Cable for -68D:  (2)  IDAN-XTMS-68 

RFQ

Contact us for more information:    814 234-8087    sales@rtd.com

Description     Specifications    Dimensions and Pinout Drawings    Shock Mount 

IDAN™ Selection               SYSTEMS              PC/104 Menu               Home

Copyright © 1998-2008 RTD Embedded Technologies, Inc.  All rights reserved.