
IDAN™
Peripheral
Module
Selection Guide
PC/104 & PC/104-plus

IDAN™ PC/104 & PC/104-Plus
Network Modules
|
IDAN™ Ethernet Modules |
||
|---|---|---|
| PC/104 | Description | OEM |
| CM202ER NE2000
Ethernet with 10Base-2 coax, 10Base-T and AUI interfaces.
SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 10Base-2 BNC AUI port 15 Pin "D" 10Base-T port 9 pin "D" with RJ45 adapter |
$ 595 |
|
| PC/104-plus | Description | OEM |
| CM17215HR
Independent Dual Fast Ethernet with MT-RJ Fiber interfaces SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: two 10/100Base-T port 9 pin "D" with RJ45 adapters |
$ 795 |
|
| CM17212HR
Independent Dual Fast Ethernet with 10 / 100Base-T interfaces. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 10/100Base-T port 9 pin "D" with RJ45 adapter |
$ 495 |
|
|
IDAN™ Wireless LAN Module |
||
|---|---|---|
| PC/104-plus | Description | OEM |
| WLAN17202ER
Wireless LAN, 802.11a/b/g and Super AG supported protocols with up to 108 Mbps
data transfer rates. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 2 SMA female connectors |
$ 695 |
|
|
IDAN™ CAN Bus Modules |
||
|---|---|---|
| PC/104 | Description | OEM |
| ECAN1000HR One channel
galvanically isolated I/O Mapped CAN bus controller.
SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 1 port 9 pin "D" |
$ 445 |
|
| ECAN527DHR Two channel
galvanically isolated Memory Mapped CAN bus controllers.
SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 2 ports 9 pin "D" |
$ 570 |
|
|
IDAN™ Serial Interface Controller Modules |
||
|---|---|---|
| PC/104 | Description | OEM |
| CM310HR Four 16C550 RS232/422/485 serial ports Pinout & function compatible with RTD cpuModules. Operating Temperature -40°C to +85°C. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 2 serial ports 9 pin "D". BACK PANEL: 2 serial ports 9 pin "D". |
$ 598 |
|
| CM312ER Four 16C550 RS232/422/485 serial
ports and NE2000 Ethernet with 10Base-T, and 10Base-2 interfaces.
Pinout & function compatible with RTD cpuModules. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: Two 9 pin "D" and one BNC BACK PANEL: Two serial ports 9 pin "D" One 10Base-T 9 pin "D" to RJ45 |
$ 798 |
|
| IDAN-CM313HRS | CM313HR Four
16C550 RS232/422/485 serial ports and SMC9000 Ethernet with 10Base-T, and
10Base-2 interfaces.
Pinout & function compatible with RTD cpuModules. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: Two 9 pin "D" and one BNC BACK PANEL: Two serial ports 9 pin "D" One 10Base-T 9 pin "D" to RJ45 |
$ 895 |
| CM316HR Dual
Synchronous RS232/422/485 serial ports. Operating Temperature -40°C to +85°C. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 1 serial port 25 pin "D". BACK PANEL: 1 serial port 25 pin "D". |
$ 695 |
|
| PC/104-plus |
Description |
OEM |
| IDAN-CM17320HRS | CM17320HR Eight
16C550 RS232/422/485 serial ports Pinout & function compatible with RTD cpuModules. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: One 37 pin "D", ports 1-4 BACK PANEL: One 37 pin "D", ports 5-8 |
$ 895 |
|
IDAN™ PC Card Interface Controller Modules |
||
|---|---|---|
| PC/104 | Description | OEM |
| CM6109HR-1 One Single
Slot Intel Compatible PC Card (PCMCIA) interface for Types I
& II.
SINGLE HEIGHT: machined aluminum frame with card cover. FRONT PANEL: PC Card access slot for Type I & II card insertion into PCMCIA connector with ejector. |
$ 595 |
|
| CM6109HR-2 Two Single Slot Intel
Compatible PC Card (PCMCIA) interfaces for Types I, II & III.
DOUBLE HEIGHT: machined aluminum frame with card cover. FRONT PANEL: PC Card access slot for Types I, II & III card insertion into PCMCIA connector with ejector. |
$ 795 |
|
|
PC/104-plus |
Description |
OEM |
| CM17109ER-1 One Single
Slot 16-bit PCMCIA & 32-bit Cardbus interface for Types I & II PC Cards. SINGLE HEIGHT: machined aluminum frame with card cover. FRONT PANEL: PC Card access slot for Type I & II card insertion into PCMCIA connector with ejector. |
$ 595 |
|
|
IDAN™
USB 2.0 Controller Module |
||
|---|---|---|
| PC/104-plus | Description | OEM |
| CM17407HR Five
Independent USB 2.0 Port Network Connections. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 4 USB 2.0 ports: two 9 pin "D". BACK PANEL: 1 USB 2.0 port: one 9 pin "D". |
$ 445 |
|
|
IDAN™ FireWire™ Module |
||
|---|---|---|
| PC/104-plus | Description | OEM |
| CM17208HR Three Independent FireWire Connections support
FireWire, iLINK, and SB1394 implementation of IEEE STD-1394b. Each
channel capable of supporting 100/200/400/800 Mb/s transfer rates. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 3 FireWire ports: Three 9 pin "D". |
$ 595 |
|
IDAN™
PC/104
Cellular and Telematics COM Modules
|
IDAN™
Cellular
and Telematics
COM Modules |
||
|---|---|---|
| PC/104 | Description | OEM |
| COM16055ER
GSM/GPRS modem uses a Siemens MC55 tri band
900/1800/1900MHz engine. Twelve channel low power GPS receiver using Fastrax
iTrax03/02 engine. Temperature sensing and 16 TTL level digital I/O lines. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: FME male, SMA female, & 25 pin "D". |
RFQ | |
| Starter Kit for IDAN-COM16055ERS includes: IDAN-COM16055ER-1, GSM cone antenna with 2.3 m cable, and GPS antenna with 5.9 m cable. | RFQ | |
| COM16055RER
GSM-Rail modem uses a Triorail TRM:2 based GSM-R modem
dual band
900/1800MHz engine. Twelve channel low power GPS receiver using Fastrax
iTrax03/02 engine. Temperature sensing and 16 TTL level digital I/O lines. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: FME male, SMA female, & 25 pin "D". |
RFQ | |
| Starter Kit for IDAN-COM16055RERS includes: IDAN-COM16055RER-1, GSM cone antenna with 2.3 m cable, and GPS antenna with 5.9 m cable. | RFQ | |
| GPRS6055ER
GSM/GPRS modem uses a Siemens MC55
dual band
900/1800MHz engine. Temperature sensing and 16 TTL level digital I/O
lines. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: FME male & 25 pin "D". |
RFQ | |
| Starter Kit for IDAN-GPRS6055ERS includes: IDAN-GPRS6055ER-1, GSM flat antenna with 2.3 m cable, and GPS antenna with 5.9 m cable. | RFQ | |
|
Operating
Temperature -30° to
+65°C Auto switch-off at +75°C |
||
| PC/104-plus | Description | OEM |
| COM17075ER
GSM/GPRS/EDGE modem uses a Siemens MC45 quad band
850/900/1800/1900MHz engine. Twelve channel low power GPS receiver using Fastrax
iTrax03/02 engine. Temperature sensing and 16 TTL level digital I/O lines. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: FME male, SMA female, & 25 pin "D". |
RFQ | |
| Starter Kit for IDAN-COM17075ERS includes: IDAN-COM17075ER-1, GSM cone antenna with 2.3 m cable, and GPS antenna with 5.9 m cable. | RFQ | |
IDAN™
PC/104 Data Modem Module
|
IDAN™ Data Modem Module |
||
| PC/104 | Description | OEM |
|---|---|---|
| EFM104HR HighRel
Embedded data/fax/voice modem for industrial applications.V.90/56K modem
with Class 1/2 faxing at 14.4K. Standard AT-style commands. US/CAN/EURO
approved . SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: One modem 9 pin "D" to RJ11 |
$ 495 |
|
IDAN™
PC/104 GPS Receiver Modules
|
IDAN™ GPS Receiver Modules |
||
| PC/104 | Description | OEM |
|---|---|---|
| GPS140HR NMEA-0183 Compatible GPS positioning board with 12 parallel-channel satellite receiver with differential GPS support. Direct interface through onboard 16C550 UART channel, ideal for automotive and fleet management systems. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 1 SMA female connector 1 9 pin "D" utility connector 1 9 pin "D" DGPS connector |
$ 745 |
|
| GPS140HR IDAN-GPS140HR plus Active Antenna |
$ 795 |
|
| GPS6160HR NMEA-0183 Compatible GPS positioning board with 12 parallel-channel satellite receiver. Direct interface through onboard 16C550 UART channel, ideal for automotive and fleet management systems. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 1 SMA female connector Digital I/O port 25 pin "D" |
$ 645 |
|
| GPS6160HR IDAN-GPS6160HR plus Active Antenna |
$ 695 |
|
| GPS6185HR Complete
PC/104 High Precision GPS receiver system with direct interface through 16C550 UARTs.
Designed for use with NOVATEL low power OEMV-2 receiver
“all-in-view” parallel 72-channel, dual frequency or 36-channel single
frequency.
True NMEA-0183 data protocol and binary data. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 1 SMA connector antenna 1 9-pin Utility connector 1 9-pin serial communication REAR PANEL: 1 SMA connector oscillator 1 25-pin Digital I/O 1 9-pin Novatel USB |
$ 648 |
|
| IDAN-GPS6185HR with dual channel receiver installed - 2 cm real-time kinematic positioning, outputs RT-2® corrections and raw data, real-time DGPS, SBAS, 20Hz |
RFQ |
|
| IDAN-GPS6185HR with dual channel receiver installed - Outputs RT-2® corrections and raw data, real-time DGPS, SBAS, 20Hz |
RFQ |
|
| IDAN-GPS6185HR with single channel receiver installed - 20 cm real-time kinematic positioning, outputs RT-20® corrections and raw data, real-time DGPS, SBAS, 20Hz |
RFQ |
|
| IDAN-GPS6185HR with single channel receiver installed -Outputs RT-20® corrections and raw data, real-time DGPS, SBAS, 20Hz |
RFQ |
|
IDAN™
PC/104 & PC/104-Plus
Video Controller Modules
|
IDAN™ SVGA Video Controller Modules |
||
|---|---|---|
| PC/104 | Description | OEM |
| CM110HR SVGA
supports CRT, LCD, EL, Plasma Panels & switched panel supplies.
SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: VGA port 15 pin "D" & flat panel port 44 pin "D". |
$ 645 |
|
| CM112HR SVGA
supports CRT, LCD, EL & Plasma Panels, switched panel supplies, IDE &
floppy interface.
SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: VGA port 15 pin "D" flat panel port 44 pin "D" BACK PANEL: floppy port 37 pin "D" Recommended Cable: IDAN-XKCM19 |
$ 745 |
|
| PC/104-plus | Description | OEM |
| CM17110HR SVGA
supports CRT,LCD,EL, Plasma Panels & switched panel supplies.
SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: VGA port 15 pin "D" flat panel port 44 pin "D" |
$ 695 |
|
| CM17120HR SVGA
supports CRT,LCD,EL, Plasma Panels & switched panel supplies.
SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: DVI-I Connector |
$ 645 |
|
IDAN™
PC/104-Plus
Frame Grabber Modules
|
IDAN™ Frame Grabber Modules |
||
| PC/104-plus | Description | OEM |
|---|---|---|
| VFG7350ER Dual
Channel Video Frame Grabber Card with MPEG-2 Video Compression; 4 switched composite video signals per channel; 8 total SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 4 SMA connectors; Stereo Audio 9-pin "D" BACK PANEL: Opto-Isolated I/O, 4 Video Inputs 62-pin "D" |
$ 1215 |
|
| VFG7330ER Dual
Channel Video Frame Grabber Card; 4 switched composite video signals per channel; 8 total SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 4 SMA connectors; Stereo Audio 9-pin "D" BACK PANEL: Opto-Isolated I/O, 4 Video Inputs 62-pin "D" |
$ 1015 |
|
| CM7326ER Video
Frame Grabber Card; 6 switched composite video signals SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 6 SMA female connectors BACK PANEL: Digital Video 25-pin "D"; Control 15-pin "D" |
$ 755 |
|
| CM7327ER Video Frame Grabber Card; 6 switched composite video signals SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 6 SMA female connectors BACK PANEL: Digital Video 25-pin "D"; Control 15-pin "D" |
$ 755 |
|
IDAN™
PC/104 Mass Storage Modules
|
IDAN™ Mass Storage Modules |
||
|---|---|---|
| PC/104 | Description | OEM |
| Complete Module includes CM102-ZIP Floppy & IDE controller
Peripheral Module, Frame with access cover, and 3.5" FLOPPY DRIVE Drive included. 2.165" HEIGHT: machined aluminum frame with card cover. |
$ 790 |
|
| Complete Module includes IDE Peripheral Module, Frame and 2.5" Flash or Rotating Hard Drive Installed DOUBLE HEIGHT: machined aluminum frame with drawer. |
RFQ |
|
| CMT6104 1.8" removable Flash
drive or rotating IDE ATA type drive carrier and interface for PC/104
bus. External IDE interface on board. Drive not included. Use Flash drive for HR applications. SINGLE HEIGHT: machined aluminum frame with card cover. |
$ 425 |
|
| CMT106ER
2.5" Flash or rotating IDE drive carrier and interface for PC/104 bus. 2.5" Flash or Rotating Hard Drive Installed SINGLE HEIGHT: machined aluminum frame. |
RFQ | |
| CMT6106HR
2.5" Flash or rotating IDE drive carrier and interface for PC/104 bus. Drive not included. Use Flash drive for HR applications. SINGLE HEIGHT: machined aluminum frame. |
$ 325 |
|
| CMT3106ER
2.5" Flash or rotating drive carrier for EIDE interface. EIDE interface to VIA Eden™ and Intel Celeron™ EIDE connector. 2.5" Flash or Rotating Hard Drive Installed SINGLE HEIGHT: machined aluminum frame. |
RFQ | |
| CMT36106HR
2.5" Flash or rotating drive carrier for EIDE interface. EIDE interface to VIA Eden™ and Intel Celeron™ EIDE connector. Drive not included. Use Flash drive for HR applications. SINGLE HEIGHT: machined aluminum frame. |
$ 325 |
|
| CMT107ER
2.5" Flash or rotating IDE drive carrier interface with PC/104 bus.
External floppy and IDE interface on board. 2.5" Flash or Rotating Hard Drive Installed SINGLE HEIGHT: machined aluminum frame. BACK PANEL: floppy port 37 pin "D". Recommended Cables: IDAN-XKCM19 and IDAN-XKCM26 NOTE: No I/O connector for secondary IDE. |
RFQ | |
| CMT107ER
2.5" Flash or rotating IDE drive carrier interface with PC/104 bus.
External floppy and IDE interface on board. 2.5" Flash or Rotating Hard Drive Installed DOUBLE HEIGHT: machined aluminum frame. BACK PANEL: IDE port 50 pin subminiature "D" floppy port 37 pin "D" Recommended Cables: IDAN-XKCM19 , IDAN-XKCM26 and IDAN-XKCM29 |
RFQ | |
| CMT6107HR
2.5" Flash or rotating IDE drive carrier interface with PC/104 bus.
External floppy and IDE interface on board. Drive not included. Use Flash drive for HR applications. SINGLE HEIGHT: machined aluminum frame. BACK PANEL: floppy port 37 pin "D" Recommended Cables: IDAN-XKCM19 and IDAN-XKCM26 NOTE: No I/O connector for secondary IDE. |
$ 395 |
|
| CMT6107HR
2.5" Flash or rotating IDE drive carrier interface with PC/104 bus.
External floppy and IDE interface on board. Drive not included. Use Flash drive for HR applications. DOUBLE HEIGHT: machined aluminum frame. BACK PANEL: IDE port 50 pin subminiature "D" floppy port 37 pin "D". Recommended Cables: IDAN-XKCM19 , IDAN-XKCM26 and IDAN-XKCM29 |
$ 395 |
|
| CM6109HR-1 One Single
Slot Intel Compatible PC Card (PCMCIA) interface for Types I
& II.
SINGLE HEIGHT: machined aluminum frame with card cover. FRONT PANEL: PC Card access slot for Type I & II card insertion into PCMCIA connector with ejector. |
$ 595 |
|
| CM6109HR-2 Two Single Slot Intel
Compatible PC Card (PCMCIA) interfaces for Types I, II & III.
DOUBLE HEIGHT: machined aluminum frame with card cover. FRONT PANEL: PC Card access slot for Types I, II & III card insertion into PCMCIA connector with ejector. |
$ 795 |
|
| IDAN-CMT6118HRS | CMT6118HR
PC/104 Single-slot CompactFlash™ Controller with External IDE connector and Floppy Controller SINGLE HEIGHT: machined aluminum frame with card cover. |
$ 445 |
|
PC/104-plus |
Description |
OEM |
| CM17109ER-1 One Single
Slot Intel Compatible PC Card (16-bit & 32-bit PCMCIA) interface for Types I
& II.
SINGLE HEIGHT: machined aluminum frame with card cover. FRONT PANEL: PC Card access slot for Type I & II card insertion into PCMCIA connector with ejector. |
$ 595 |
|
IDAN™
PC/104
Motion Control and Motor Interface Modules
|
IDAN™ Servo Motor Controller |
||
| PC/104 | Description |
OEM Price |
|---|---|---|
| ESC629ER 2 Channel ultra compact DC servo motor control board with powerful
capabilities. Features include position, velocity and acceleration control,
programmable PID loop filters and quadrature encoder feedback; 2 onboard
H-bridges with 25A drive at 60V DOUBLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: 9 pin "D" Motor Control #1 62 pin "D" 24 TTL I/O BACK PANEL: 9 pin "D" Motor Control #2 |
$ 892 |
|
| ISC629ER 2 Channel
Galvanic Isolation ultra compact DC servo motor control board with powerful
capabilities. Features include position, velocity and acceleration control,
programmable PID loop filters and quadrature encoder feedback; 2 onboard
H-bridges with 25A drive at 60V DOUBLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: High current 9 pin "D" Motor Control #1 62 pin "D" 24 TTL I/O BACK PANEL: High current 9 pin "D" Motor Control #2 |
$ 942 |
|
|
IDAN™ Synchro/Resolver Interface |
||
| PC/104 | Description |
OEM Price |
|---|---|---|
| ERES104ER 2-Channel PC/104 compliant embedded
11.8 V Synchro/Resolver/Inductosyn/LVDT interface board with programmable 10-16-bit resolution and onboard programmable 400-2500Hz sine wave reference oscillator. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 37 pin "D" |
$ 1049 |
|
| ERES104ER 2-Channel PC/104 compliant embedded
90 V Synchro/Resolver/Inductosyn/LVDT interface board with programmable 10-16-bit resolution and onboard programmable 400-2500Hz sine wave reference oscillator. SINGLE HEIGHT: machined aluminum frame. FRONT PANEL: 37 pin "D" |
$ 1049 |
|
IDAN™
PC/104 & PC/104-Plus
Power Supply Modules
|
IDAN™ Power Supply Modules |
||
|---|---|---|
| PC/104 | Description |
OEM Price |
|
VPWR104HRTX-50W 50 Watt power supply Power inputs: 8-36 VDC Power outputs: +5VDC @ 10A, +12VDC @ 1A, -12VDC @ 0.5A, -5 Vdc 0.1A SINGLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D" |
$ 595 |
|
|
XPWR104HRTX-75W
75 Watt power
supply Power inputs: 8-36 VDC Power outputs: +5VDC @15A, +12VDC @ 2A, and -12VDC @ 1A; outputs are short circuit protected SINGLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D" |
$ 785 |
|
| HPWR104HRTX-75W
75 Watt embedded power
supply Power inputs: 8-36 VDC Power outputs: +5VDC @15A, +12VDC @ 2A, and -12VDC @ 1A (75W for bus & peripherals). SINGLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D" |
$ 595 |
|
| IPWR104HR-L100W
100 Watt isolated power supply Power inputs: 18-36 VDC input. Power outputs: +5VDC @ 12A, +12VDC @ 2A and -12VDC @ 500mA (100W bus & peripherals). DOUBLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D". |
$ 795 |
|
| IPWR104HR-H100W
100 Watt isolated power supply Power inputs: 33-75 VDC input. Power outputs: +5VDC @ 12A, +12VDC @ 2A and -12VDC @ 500mA ( 100W bus & peripherals). DOUBLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D". |
$ 795 |
|
| APWR104HR-30W
30 Watt filtered avionics power supply Power inputs: 16-50 VDC input. Power outputs: +5VDC @ 6A, Filtered output: 140 Watts of filtered DC input voltage for user applications (28VDC @ 5A Typical) DOUBLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D". |
$ 2195 |
|
| APWR104HR-50W
50 Watt filtered avionics power supply Designed to meet: 50 dB minimum attenuation at 500 kHz Clamps output voltage to 58 volts maximum MIL-STD-704A, B, C, and D surge requirements MIL-STD-461C CE03, MIL-STD-461D CE102, DEF STAN 59-41 and 61-5 EMC requirements Power inputs: 16-50 VDC input. Power outputs: +5VDC @ 6A, +/-12 VDC @ 1.17A DOUBLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D". |
$ 2795 |
|
| APWR106HR-50W
50 Watt filtered avionics power supply Designed to meet: 40 dB minimum attenuation at 500 kHz High input transient voltage: 80 volts for 1 sec MIL-STD-704A surge requirements MIL-STD-461C CE03 and MIL-STD-461D CE102 Power inputs: 16-50 VDC input. Power outputs: +5VDC @ 6A, +/-12 VDC @ 1.17A DOUBLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D". |
$ 2795 |
|
| PC/104-plus | Description |
OEM Price |
| IDAN-ATX104plusHRTX-88WS | ATX104plusHR
88 Watt power supply Power inputs: 8-36 VDC Power outputs: +5VDC Standby @ 1A,+5VDC @ 10A, -5 Vdc at 0.1 A, +3.3 Vdc at 10 A, +12VDC @ 2A, -12VDC @ 0.5A. SINGLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D" |
$ 995 |
| HPWR104plusHR
83 Watt power supply Power inputs: 8-36 VDC Power outputs: +5VDC @ 10A, -5 Vdc at 0.1 A, +3.3 Vdc at 10 A, +12VDC @ 2A, -12VDC @ 0.5A. SINGLE HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: power switch, power LED. BACK PANEL: power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ); power output 9 pin "D" |
$ 895 |
|
| IDAN™ Battery Backup UPS Modules | ||
| PC/104 | Description |
OEM Price |
|---|---|---|
| UPS25ERTX-1
PC/104 NiMH
UPS module with 1500 mAh 8 AA cell pack HPWR104HRTX-75W 10 - 32VDC input range. QUAD HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: Battery Box Door, power switch, power LED. BACK PANEL: power output 9 pin "D". power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ) |
$ 1465 |
|
| UPS25ERTX-2
PC/104 NiCd
UPS module with 1000 mAh 8 AA cell pack HPWR104HRTX-75W 10 - 32VDC input range. QUAD HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: Battery Box Door, power switch, power LED. BACK PANEL: power output 9 pin "D". power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ) |
$ 1465 |
|
| PC/104-plus | Description |
OEM Price |
| UPS25ERTX-1
PC/104 NiMH
UPS module with 1500 mAh 8 AA cell pack HPWR104plusHR 10 - 32VDC input range. QUAD HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: Battery Box Door, power switch, power LED. BACK PANEL: power output 9 pin "D". power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ) |
$ 1765 |
|
| UPS25ERTX-2
PC/104 NiCd
UPS module with 1000 mAh 8 AA cell pack HPWR104plusHR 10 - 32VDC input range. QUAD HEIGHT: machined aluminum frame with structural heatsink. FRONT PANEL: Battery Box Door, power switch, power LED. BACK PANEL: power output 9 pin "D". power input 2 pin quick connect/disconnect circular connector and adapter cable ( IDAN-XKCM18 ) |
$ 1765 | |
IDAN™ PC/104 Dual Port Memory Module
|
IDAN™ Dual Port Memory Module | ||
|
PC/104 |
Description |
OEM |
| IDAN-DPM104HRS | 16 KByte fast dual port SRAM with two 16-bit stack through PC/104 Busses.
Interrupt and semaphore support. DOUBLE HEIGHT: machined aluminum frame. |
$675 |
Contact us for more information: 814 234-8087 sales@rtd.com
Description Specifications Dimensions and Pinout Drawings Shock Mount
IDAN™ Selection SYSTEMS PC/104 Menu Home
Copyright © 1998-2008 RTD Embedded Technologies, Inc. All rights reserved.