RTD Embedded Technologies, Inc. PC104 and PC104 plus embedded computers Home Page RTD Product Menu Single Board Computers Digital Signal Processing Frame Grabber SVGA Panel DVI MPEG Bluetooth WLAN 802.11 Cellular GSM GPRS GPS-Rail Ethernet Quad Serial CAN Bus USB 2.0 Modem PCMCIA GPS Hard Drives Power Supplies IDE & Floppy Up to 16 Bit Resolution 8 differential or 16 single ended inputs 16-bit 200 kHz throughput outputs FIFO buffer Channel Gain Table Pacer & Burst Clocks Programmable Gain Bit Programmable Opto-isolated Timer/Counters Incremental Encoders Servo Motor Control Synchro / Resolver DC/DC Isolated Avionics IDAN HiDAN HiDANplus Return to RTD's Home Page

PC/104EZ™ Enclosed PC/104 System Specifications

 IDAN™      HiDAN™     HiDANplus™    Field Pad

Dimensions               Bolt Torque            Aluminum Alloy 6061

 

Dimensions

IDAN™ Frame Height Width Length
Single High 0.67 5.117 5.983
Double High 1.339 5.117 5.983
Base Plate with Flange 0.3125 6.62 5.983
Base Plate with Shock Mounts 1.938 6.62 5.983
@Maximum extension 2.278 6.62 5.983
Bottom Cover Plate 0.385 5.117 5.983
Top Cover Plate 0.351 5.117 5.983
Cover Plate with Handle 0.385 5.117 7.361
HiDAN™ Frame Height Width Length
CPU Frame 2.839 5.117 6.30
Single Sleeve 0.662 5.117 6.30
Double Sleeve 1.325 5.117 6.30
Triple Sleeve 1.988 5.117 6.30
Quadruple Sleeve 2.650 5.117 6.30
Base Plate with Flange 0.385 6.62 6.30
Base Plate with Shock Mounts 1.938 6.62 6.30
@Maximum extension 2.278 6.62 6.30
Cover Plate 0.375 5.117 6.30
HiDANplus™ Frame Height Width Length
CPU Frame 2.655 5.850 7.30
Single Sleeve 0.669 5.850 7.30
Double Sleeve 1.331 5.850 7.30
Triple Sleeve 1.993 5.850 7.30
Quadruple Sleeve 2.655 5.850 7.30
Base Plate with Flange 0.385 7.35 7.30
Base Plate with Shock Mounts 1.938 7.35 7.30
@Maximum extension 2.278 7.35 7.30
Cover Plate 0.375 5.850 7.30
Field Pad Height Width Length
System 3.20 8.82 12.75

NOTE:  Wall thickness is 0.200 typical except where undercut for weight reduction
                           or connector mounting.

 

Recommended Torque Specifications 

Screw Size and
Threads Per Inch

Recommended Torque
in Inch LBS

Recommended Torque
in Newton Centimeters
2-56

1.0

 11.3
4-40 3.0 33.9
6-32 5.5 62.1
8-32 9.5 107.3
10-32 19.0 214.7
M5 19.0 214.7

  

Aluminum Housing Information

·      Aluminum Alloy 6061 Chemical Composition Limits (%) - Silicon 0.4-0.8, Iron 0.7, Copper 0.15-0.4, Magnesium 0.8-1.2, Chromium 0.04-0.35, Zinc 0.25, Titanium 0.15, and Aluminum comprises the remainder.

·      Extremely versatile, this heat-treatable alloy combines good weldability and formability, high corrosion resistance, and medium strength.  Use it for chemical equipment, vehicle parts, scaffolding, and pipe fittings.  Yield strength is 40 ksi (40,000 psi).  Hardness is 95 Brinell.  Melting range is 1080° to 1205° F.

·      Thermal treatment - Annealed - Temper - T6 = Solution heat treated and artificially aged.

·      Finish - Class 3, Clear Chromate per MIL-C-5541

Description     Specifications    Dimensions and Pinout Drawings    Shock Mount 

 Systems                         PC/104 Menu                              Home

Copyright © 1998-2008 RTD Embedded Technologies, Inc.  All rights reserved.