Featuring Fail Safe & Quick Boot Modes
	USB
COM2			COM1
TTL Flat Panel			multiPort: Parallel, aDIO™, Floppy
SVGA			Utility: Keyboard Speaker Battery Reset
	Power	EIDE                PS/2 Mouse
	CMC26686CX333HR-32 cpuModule™ Solder-tail expansion bus, vertical I/O & feed-thru I/O connectors available on request
ISA (PC/104)
	with standard Heatsink installed
	Rugged Fanless IDAN™ & HiDAN™ Configuration -40°C to +85°C

• 333 MHz @ 2.2 Vdc Geode™ MMX™
• 32, 128 & 256 Mbytes SDRAM
• 32 pin SSD socket supports:
  • Miniature 1GB ATA/IDE Flash Disk installed unless otherwise specified; 4GB optional
  • Natively supported by all major operating systems
• Rugged Passive Heatsink
• Passive Structural Heatsink in
  IDAN^™ and HiDAN^™ System Configurations
• Full Duplex support 
• Two RS-232/422/485 Ports
• multiPort with Parallel Port, Floppy Drive Interface and 18-bit Digital I/O Port
• Two USB (Universal Serial Bus)
• EIDE Controller with UltraDMA 33
• PS/2 Mouse Port
• Keyboard Port
• Speaker Port
• RTD Enhanced Award BIOS with Quick Boot Mode Installed
• Nonvolatile storage of CMOS settings
• Mating Connectors
  • Standard 4-pin 0.1" DIL header (PS/2 Mouse)
  • Standard 10-pin 0.1" DIL header (Utility, USB, COM1, COM2, SVGA)
  • Standard 12-pin 0.1" DIL header (Power)
  • Standard 26-pin 0.1" DIL header (multiPort)
  • Standard 44-pin 2mm DIL header (EIDE)

Features:

• Complete PC-compatible motherboard
• Stackable 104-pin PC/104 AT bus
• Math coprocessor
• 16KB internal cache
• Boot Block Flash BIOS
• Nonvolatile configuration without battery
• Y2K compliant real time clock (external battery required)
• Watchdog timer
• 7 fully functional DMA channels, including non auto-initialize mode
• 15 interrupt channels
• 3 timer/counter channels
• 32 pin SSD socket supports:
  • Miniature 1GB ATA/IDE Flash Disk installed unless otherwise specified; 4GB optional
  • Natively supported by all major operating systems

I/O:

• Two Software-configurable RS-232/422/485 serial ports
  • 16550 compatible UARTs for high-speed
  • Termination resistors for RS-422/485
• Two USB 1.0 (Universal Serial Bus) Ports
  • Supports both 12Mb/s (full-speed) and 1.5Mbs (lowspeed) peripherals
  • 500 mA @ 5 Vdc provided per port
• multiPort function connector
  • Parallel port SPP, PS/2 bi-directional, EPP & ECP
  • Advanced Digital I/O (aDIO^™)
    • One 8-bit port programmable as input or output
    • Eight bit-programmable I/O with Advanced Digital Interrupt Modes
      • Event Mode Interrupt generates an interrupt when any input bit changes
      • Match Mode Interrupt generates an interrupt when input bits match a preset value
      • External Strobe Mode latches 8 data inputs and generates and interrupt
    • Two Strobes can be configured as readable inputs.
  • Floppy controller interface
• SVGA CRT and TTL Flat Panel interface
  • Pipelined burst reads/writes for increased performance 
  • Video Generator improves memory efficiency for display refresh with SDRAM
  • Supports following modes:
    • 640 x 480 (256 & 64K color)
    • 800 x 600 (256 & 64K color)
    • 1024 x 768 (256 & 64K color)
    • 1280 x 1024 (256 color)
• PS/2 Mouse port
• Utility port
  • PC-AT compatible keyboard port
  • Speaker (0.1W output) port
  • Hardware Reset input
  • Battery input for Real Time Clock
• Power I/O
  • Access to PC/104 Bus power pins
  • Gnd, ±12 & 5 VDC

• RTD Enhanced Award BIOS with built-in SETUP and Quick Boot Mode Installed
• Fail Safe Boot Mode using embedded ROM-DOS
• Includes ROM-DOS , SSD software, utilities, and example programs.
• Compatible with all x86 operating systems:
• MS-DOS, ROM-DOS, PC-DOS
• Windows (98, NT 4.0, 2000, XP, and XP Embedded)
• Linux (desktop and real-time versions)
• RTOSes such as QNX, VxWorks, and Windows CE

• Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W)
• Weight: Approximately 0.10 Kg (0.22 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125 °C
  • ATA Flash Disk limit: -40° to +100 °C
• MTBF: 115,000 hours typical
• Power requirements 333 MHz: 6.3 W @ 5 VDC typical

Recommended Accessories:

• Cable Kit XK-CM70
• Cable Kit XK-CM49 (multiPort Floppy Drive)
• TCP/IP Sockets

Documentation and Software Downloads:

• Hardware Manual
• Drivers and Example Programs
• Software Manual(s)
• Application Notes

Ordering Information 

Copyright © 1998-2006 RTD Embedded Technologies, Inc.  All rights reserved.