DM7520HR-1 dataModule®

Rugged IDAN™ Configuration

Features:

• 3.3V and 5V PCI signaling compatible

• Bus Mastering

• High-speed Analog Inputs

• 8 differential or 16 single-ended channels

• 12-bit A/D with matched internal Sample and Hold

• 0.8 µs conversion time (1.25 MHz throughput)

• ±5, ±10, 0 to +10V Analog Input Ranges

• Programmable binary gains of 1, 2, 4, 8, 16 & 32

• 1K entry Channel-Gain Scan Memory with Skip Bit

• High-speed Data Paths

• 33 MHz, 32-Bit PCI Bus

• Multi-channel Buffered Serial Port (McBSP)

• 1K or 8K sample buffer on A/D converter

• 1K or 8K sample buffer on each D/A converter channel

• 500KHz sine wave generator

• Bus master transfer

• Versatile Triggering

• Software, Pacer Clock, Burst Clock and External Triggers

• Pre-, Post-, and About-Trigger Modes

• Random scan, burst and multi-burst using channel-gain table

• Two fast analog outputs

• 12-bit resolution
• Typical 5µs settling time (+/-10V range)
• ±5, +5, ±10, & +10V output ranges
• 5mA output current
• Digital I/O
• 3 Data-marker Input Bits
• 1K or 8K byte digital input buffer
• 8 bit-programmable digital I/O lines and an 8-bit programmable port
• Advanced digital interrupts
• -12/+24mA output drive currents
• Timers and Counters
  • Twelve 16-bit, 8 MHz timer/counters to support timing and counting functions (3 available for User applications).
• Programmable Interrupt Source
• Mating Connector
• Manufacturer: 3M
• Part Number: 82068-6000

Physical Attributes:

• Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W)
• Weight: Approximately 0.15 Kg (0.34 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125 °C
• Power requirements:   2.5 W  @ 5 VDC typical

Recommended Accessories: