FPGA7800HR
 PC/104-plus dataModule®
User Application Specific FPGA Designs
(FPGA custom designed by RTD)

Operating Temperature -40° to +85°C

FPGA7800HR dataModule®

Rugged IDAN™ Configuration

Features:

• Contact RTD with your project requirements for customer specific applications
  Off-the-Shelf FPGA Platforms designed by RTD
• PCI-bus interface with PLX9056 33 MHz, 32-bit PCI interface
• ISA-bus interface for dual bus access
• Xilinx Spartan II XC2S200 FPGA with onboard configuration flash
  •  200,000 system gates
  • 57,344 bits of SRAM (fourteen 4096 bit blocks)
  • TTL compatible 3.3 Volt outputs, 5 Volt Tolerant Inputs
  • Dedicated Clock inputs
  • Programmable Configuration Flash
  • ISA bus connects directly to FPGA
  • Program through JTAG and PCI
• 48 diode protected I/O lines

• Two identical connectors with three configurations each

  • 25 I/O with grounds

• 8 MB SDRAM onboard
• Standard outputs:
  -24mA / +24mA (source / sink) on all I/O's
• Pull-up/pull-down resistors on each bit or each port programmable in FPGA
• On-board crystal oscillator clock
• Two 82C54 Counter/Timers (six 16-bit counter/timers)
• Mating Connector
• Two Standard 50-pin 0.1 inch spaced 2 x 25