GPS Antenna
Headset			GSM Antenna
Digital I/O			Base Address Set
		ISA (PC104)
	COM16055ER Peripheral Module
	SK-COM16055ER  Starter Kit
	COM16055ER, adapter cable, Cellular antenna, GPS Antenna, and -2 includes External SIM card reader with cable
	Rugged IDAN™ Configuration

• GSM/GPRS Features
  • Siemens MC55 based GPRS modem
  • Tri-band 900/1800/1900 MHz
  • Up to 85.6 kbit/sec downlink speed with GPRS
  • GPRS multi-slot class 10
  • GPRS mobile station class B
  • 2.4, 4.8, 9.6, 14.4 kbit/sec data rate, group 3 fax services
  • SMS and SMS cell broadcast
  • Onboard SIM-card socket or external SIM reader
  • Output power:
    • Class 4 (2W) GSM900
    • Class 1 (1W) GSM1800/1900
• 12 Channel Low Power GPS Features
  • Fastrax iTrax03/02 GPS receiver
  • 3.3V and +5V active antenna support
  • NMEA and binary protocols
• Two 16C550 UART interfaces to host computer
• Uses COM1, COM2, COM3 ,COM4 or COMx
• Available IRQ's:  2, 5, 6, 7, 10, 11, 12, 14, 15
• 16 bit Programmable I/O
• Audio interface for headset
• Backwards Compatible with COM17045ER
• +5VDC only, 1.3W idle
• -20° to +70°C operational with temperature sensor
• -25° to +75°C restricted to emergency calls only

Applications:

• Mobile telematics
• Mobile and vehicle applications
• Fleet management
• Distributed communication systems
• Remote data logging nodes

Description:

The COM16055ER combines a wireless tri-band modem unit and a low power parallel tracking GPS receiver on one PC/104 module and is backwards compatible with the COM17045ER.

This module provides a direct and reliable GSM connection to stationary or GPRS mobile fields around the world. GSM/GPRS connectivity is achieved using the Siemens MC55 engine. This unit works in the 900 or 1800 MHz and 1900MHz (US/CAN) band and supports standard network and service provider personalization.  RTD maintains in-house equipment for testing international cellular frequency standards.  The MC55 unit also supports fast GPRS data transmission. This module utilizes the iTrax03/02 GPS receiver unit from Fastrax. This receiver is very low in power consumption and supports both NMEA and binary interface protocols. Support for +3.3V or +5V active antennas is provided. Latest technologies are used for fast GPS fix and reliable tracking in difficult moving environments.

The COM16055ER board includes two complete 16C550 compatible serial ports that can be configured with jumpers for any standard COM port address or any free address space. Both XT and AT interrupts are supported. The control registers of the board are overlaid in Base Address + 400h.

Any standard tri-band GSM and GPS antenna may be connected directly to the COM16055ER via on-board MCX connectors. Starter kits are available (see options). In IDAN installations the antenna connections are brought to the front side of the IDAN-frame.

A SIM-card socket is located on the bottom of the COM16055ER-1 module. The COM16055ER-2 module provides an external SIM-card reader connected via a standard 10-pin 150mm long flat cable.

The ambient temperature of the COM16055ER can be monitored using an on-board temperature sensor. This sensor will use status bits to indicate that the module is within a -20° to +70° C temperature range where the GSM engine is guaranteed to work reliably and will assist in the restricted operation range of -25° to +75° C.  The two 8-bit digital I/O ports may be used for general purpose TTL-level control. The input port has a 10K pull-down on all 8 lines.

Advanced GPS and GSM tool software is provided with the COM16055ER. This software package contains:

• GSM configuration
• GSM terminal program
• GSM call identification
• TCP/IP communication setting
• SMS transmit/receive
• SMS ToolKit for remote hardware access
• SIM card phone number editor
• GPS configuration data logging to a file
• GPS monitoring

I/O:

• One General Purpose Digital I/O port
  • COM16055ER Mode
    • 16 bit Programmable I/O
  • COM17045ER Mode
    • 8 TTL Outputs
    • 8 TTL Inputs
  Standard SIM Card Socket

Software:

• Modem uses standard COM port interface and AT command set
• GPS data available via COM port interface
• Compatible with all x86 operating systems
  • MS-DOS, ROM-DOS, PC-DOS
  • Windows (98, NT 4.0, 2000, XP, and XP Embedded)
  • Linux (desktop and real-time versions)
  • RTOSes such as QNX, VxWorks, and Windows CE
  • Note: Drivers may be required to use non-PC hardware features.

• Size: 90mm L x 96mm W x 15mm H (3.6"L x 3.8"W x 0.6"H)
• Weight: Approximately 0.10 Kg (0.22 lbs.)
• Operating Temperature: -20° to +70°C: 90% humidity non-condensing
                                            -25° to +75°C: restricted operation (deviation from GSM specs may occur)
• Storage Temperature: -40° to +85 °C
• Power requirements: Idle = 1.3; Active = 3.0W @ 5 VDC typical

Ordering Information

Copyright © 1998-2008 RTD Embedded Technologies, Inc.  All rights reserved.