CMT6107HR
PC/104 IDE Drive Peripheral Modules
with Floppy Interface

Operating Temperature -40° to +85°C

	IDE Connector
Configuration Jumpers
Floppy Connector
	ISA (PC104)
	CMT6107HR with Floppy Interface Peripheral Module
	Rugged IDAN™ Configuration (Single height frame shown with Floppy connector) Dual height frame available with Floppy and IDE

Module Versions:

		External Port
Part Number	Drive Type	IDE Port	Floppy Port
CMT106ER	TBD	-	-
CMT6106HR	-	-	-
CMT107ER	TBD	1	1
CMT6107HR	-	1	1

Features:

• Available as a ruggedized IDAN™ module
  •  IDAN-CMT6107HRS with external Floppy
  •  IDAN-CMT6107HRD with external Floppy and IDE
• Provides a compact IDE drive directly in your PC/104 stack
• Decodes the IDE interface from the PC/104 bus or through connector
• Requires no additional IDE controller on cpuModule™ or VGA module
• Protects drive against power supply reverse-polarity, over-current, and over-voltage
• Slave IDE drive connector
• Dual Floppy controller

Supports:

• IDE ATA series 2.5" rotating drives
• IDE ATA series 2.5" Flash drives

Description:

Easily add a compact drive to an embedded PC/104 stack with our CMT107ER and CMT6107HR Peripheral Modules.

The CMT6107HR provide a 2.5" IDE drive and floppy interfaces through the PC/104 bus.  Protection components reduce the possibility of drive damage due to reversed power-supply polarity, over-current, or over-voltage.

Physical Attributes:(without drive installed)

• Size:  112mm L x 96mm W x 15mm H (4.4"L x 3.8"W x 0.6"H)
• Weight:  Approximately 0.07 Kg (0.16 lbs.)
• Operating Temperature: -40° to +85°C: 90% humidity non-condensing
• Storage Temperature: -55° to +125°C
• Power requirements 0.4 W (+drive current) @ 5 VDC typical

Ordering Information